• Connecting the Scanner to a computer using the USB or IEEE 1394 interface
• Connecting the Scanner to a power supply

Activate the video by moving the cursor over the video clip to the right.

1. Connecting the Scanner to a computer using USB

A USB cable is used to connect the scanner to the computer via the USB interface connectors. The Connectors at the computer and scanners ends of the USB cable have different shapes. Make sure that the cable is oriented correctly before making the connection. Make sure that both the scanner and the computer are in power-off status when connecting them.

Plug the USB 2.0 interface cable into the USB connector socked situated on the right-hand side of the scanner unit.

2. Connecting the Scanner to a computer using IEEE 1394

A IEEE 1394 cable is used to connect the scanner to the computer via the iEEE 1394 interface connectors. Make sure that both the scanner and the computer are in power-off status when connecting them.

Plug the IEEE 1394 interface cable (6-pin) into the IEEE 1394 connector socked situated on the right-hand side of the scanner unit.

3. Connecting the Scanner to a power supply.

Connect one of the end of the power cable provided to the scanner's power inlet and the other end to an AC power outlet of the rated supply voltage.

Check that the scanner's Power switch remains in the Off position until the connection of both the power cord and the interface cable has been completed.