Push the Left and right open leaves on the top cover
in the upward direction to unlock them and then open the
cover fully
When the cover is fully open lower it slightly to
engage the top cover fixing stay that holds the top
cover in place
Closing the Top Cover
Raise the top covers slightly from its open position
to disengage the top cover fixing stay and then close
the cover gently
Check that the left and right levers on the top
cover are locked
Opening the top cover
Closing the top cover
2. Cleaning the Feed Rollers
Turn off the scanner
Open the cover as describe above
While rotating the feed rollers, wipe them clean
using a soft cloth that has been moisture with water or
a neutral detergent and firmly wrung out
Wipe the feed roller once again using a soft dry
cloth to remove all the moisture
Close the top cover as describe above
3. Cleaning the Gap Rollers
Turn off the scanner
Open the cover as describe above
While rotating the gap rollers, wipe them clean
using a soft cloth that has been moisture with water or
a neutral detergent and firmly wrung out
Wipe the gap roller once again using a soft dry
cloth to remove all the moisture
Close the top cover as describe above
4. Cleaning the Image Sensors
Turn off the scanner
Open the cover as describe above
Wipe off any soiled areas on the transparent contact
plates using using a soft cloth that has been moisture
with water or a neutral detergent and firmly wrung out
Wipe the transparent contact plates once again using
a soft dry cloth to remove all the moisture
