FC7000 Series Specifications
|
Parameter
|
FC7000-75
|
FC7000-100
|
FC7000-130 |
FC7000-160
|
CPU |
32-bit |
Configuration |
Digital
Servo Friction feed with MicroGritroll™
drive |
Maximum
cutting area (expanded mode) |
30.0" x 164'
(758 mm x 50 m) |
42.0" x
164'
(1067 mm x 50 m)
|
54.0" x
164'
(1372 mm x 50 m)
|
64.0" x 164'
(1514 mm x 50 m) |
Compatible film width |
3.9" to
36.2"
(100 mm to 914 mm)
|
3.9" to
48.1"
(100 mm to 1219 mm)
|
3.9" to
60.1"
(100 mm to 1500 mm)
|
3.9" to 72.2"
(100 mm to 1600) |
Maximum auto cross
cutting width |
40.0" |
52.0" |
64.0" |
74.8" |
Maximum
cutting speed |
58.5 in/sec
(1414 mm/sec)
|
Programmable axial cutting
speeds |
0.4 to 39.4 in/sec in 24
steps
(10 to 1000 mm/sec) |
Maximum axial
acceleration |
4.0 G
|
Programmable cutting
force |
20 to 600g
in 48 steps (0.196N to 5.88N) |
Minimum
character matrix |
Approximately 0.125" high
Alpha-numeric characters, varies with type of film and font
(3 mm.) |
Mechanical resolution |
0.0002"
(0.005 mm.) |
Programmable step size |
GP-GL™:
0.0004"; HP-GL® emulation: 0.001"
(GP-GL: 0.01 mm; HP-GL emulation: 0.025 mm) |
Repeatability*1 |
0.0039"
over 80" travel or better
(0.1 mm. over 2 m.) |
Number of
tool holders |
1 (accepts
cutting blade, plotting pen, and pouncing tool) |
Blade
types |
Supersteel,
ceramic, sapphire,
(0.9 mm. or 1.5 mm.) |
Pen
types |
Water-based fibertip, roller ball, and ceramic tip |
Film
types |
Self-adhesive vinyl film, fluorescent film, reflective film, Amberlith™,
Rubylith™, sandblast resist rubber, etc. |
Pouncing function
|
Standard
with multi-functional plotting surface for cutting, plotting, and
pouncing (requires optional pouncing tool)
|
Interfaces |
RS-232C
serial/Centronics parallel (auto recognition)/USB |
Data buffer |
2 Mbytes |
Command
set |
GP-GL™/HP-GL® (control panel selectable) |
Control
menu & status display |
20 digits
by 4 lines LCD with comprehensive icon corresponding soft keys |
Axis alignment
|
Standard
precision registration mark sensor for registration of pre-printed
digital image
|
Media supply mechanism
|
Integrated Accuload™ media supply system
Optional media rack for simultaneously holding up to 3 rolls of
media
|
Media
pre-feed
|
Standard (built-in
SmartFeed™ function automatically unwinds and pre-feeds media for an
operator specified distance upon self-recognition of plot file
length)
|
Floor stand
|
Standard
|
Standard
|
Standard |
Standard
|
Power
requirement |
100-240
VAC, 48-62 Hz; auto switching, 120 VA max. |
Operating environment |
50° to
95°F (10° to 35°C), 35% to 75% RH (non-condensing) |
Guaranteed accuracy
environment |
50° to
90°F (16° to 32°C), 35% to 70% RH (non-condensing) |
Standard
software |
Cutting
Master™ plug-in software, QuickCut™ plug-in software, Cutting Plotter
Controller software (Windows®/Mac® compatible) |
Options |
Additional
Media Rack, Pouncing Tool, Media Catch Basket, Registration/Axis
Alignment Loupe |
Factory
installed options |
Second
penholder |