The SK200 scanners arrives in two cardboard boxes. Please check the outer casing for damage occurred in shipping. If you detect any flaw or missing pieces immediately contact your Graphtec sales representative or nearest Graphtec vendor.
The boxes contains:
  • The Scanner
  • The Optional Scanner Stand
  • Scanner Accessories

Unpacking the SK200 Scanner box

  1. Open the scanner box.
  2. Remove the calibration packages.
  3. Check contents for accessories:
    • Power cable
    • Two Rear Guides
    • Two anti-curling Guides
    • 1 pack of cleaning paper
    • One basic calibration sheet (white)
    • One color calibration sheet
    • Software CD
    • Quick Start Guide


 

 

 


Scanner box


Accessories


Calibration sheets

Unpacking the optional SK200 Scanner Stand

  1. Open the scanner stand box
  2. Unpack the scanner stand.
  3. Check Contents for the Stand:
    • Assembly instruction
    • Top Plate
    • Left Side Tray
    • Right Side Tray
    • Left Lower Stay
    • Right Lower Stay
    • 12 Screws (M5x10)
    • 4 Decorative screws (M4x10)
    • Hexagonal wrench for M5 screws

 


Stand box


Five Stand boxes


Top Plate, Side Trays, Lower Stays, Screws & Wrench